REPOSAL? releases layer-wound high-voltage package full-automatic interlayer insulation winding machine

　 Suzhou Xiepu Electronic Machinery Equipment Co., Ltd. successfully released the SP-D102M7 model of layer-wound high-voltage package automatic interlayer insulation winding machine-this model greatly improves the winding efficiency of layer-wound high-voltage package coils, and the coil is consistent Sex. The REPOSAL? winding machine reduces the winding cost of the layer-wound high-voltage package. In the new model, it has added a compact insulation belt automatic cutting mechanism, and high-quality solutions such as dynamic balance performance after multiple skeletons are wound.

        The cross section of an R-type transformer is like the letter R, so it is called an R-type transformer. The application of R-type transformers in high-power electrical appliances can reduce inrush current. R-type transformers are one of the dry-type transformers. The iron core is made of continuous high-quality oriented cold-rolled silicon steel strip from thin to thick, and then from thick to thin. The final cross-section is close to a circle, and the shape is an uncut closed rectangle, and then passes through a special R-shaped transformer The winding machine winds the coarse secondary on its PBT skeleton. Therefore, the transformer thus manufactured has no noise, low magnetic leakage, low no-load current, low iron loss, and high efficiency; and because the coil is cylindrical, the length of the coil copper wire wound by the R-type transformer winding machine short, so , Low internal resistance, low copper consumption, low temperature rise, low over-carrier motion, and better explosive force than toroidal transformers; in addition, the primary and secondary coils are separately wound with flame-retardant PBT engineering plastic skeletons, thus high electrical strength , Good flame retardancy.

        However, the manufacturing process is more complicated. The second is the winding of the coil. Because it is wound in a closed iron core, the PBT is composed of two parts, and then the R-type transformer winding machine drives the PBT skeleton to wind, and the winding accuracy is affected. A certain influence, one is the shape of its iron core, because its expanded shape is a spinning cone, so its mold and material utilization are relatively low.

        With the development of R-type transformer winding machines, the reduction of manufacturing costs, and the improvement of quality stability, R-type transformers are being favored by more and more electronics industries with their novel and unique structure and excellent electromagnetic performance. Especially suitable for medical equipment, display equipment, audio equipment, office equipment.

Transformer coil winding machine

  Stable, high-speed and safe U-shaped core coil winding machine

The U-shaped coil winding machine is suitable for the winding of the bottom edge of the U-shaped core.Usually, the center of the U-shaped core is difficult to coincide with the rotation axis of the winding machine, resulting in a large vibration of the winding machine. , Affecting efficiency.

This type of winding machine developed by our company does not rotate the U-shaped iron core, only reciprocates, and rotates around the product to reduce vibration and improve efficiency.

      With the optimized clamping method, it only takes 2 seconds to complete the clamping.

      Therefore, the rotating parts of this type of machine have a large diameter and a high speed.There are similar machines on the market, and the larger ones do not have a protective cover. Safety accidents often occur.This machine of the company has a protective cover design.

　　　Compared with mechanical gyroscopes, fiber optic gyroscopes have no moving parts, impact resistance, high sensitivity, and long life. Therefore, fiber optic gyroscopes are widely used in high-precision and high-speed positioning scenarios and will gradually replace electromechanical gyroscopes.

　　　The basic components of the fiber optic gyroscope are the optical path and the circuit, and the fiber is the core component of the gyroscope. The fiber winding machine for preparing high-precision fiber coils has also become the key point of the gyroscope.

　　　However, due to the blockade of its related technologies, the fiber optic gyro winding machine has always been a key technology insurmountable. REPOSAL? Electronic Machinery Co., Ltd. actively develops fiber optic gyro winding machines in response to market demand.

　　　Through continuous research and improvement, we automate the winding process of the fiber optic gyroscope, and compare and analyze the winding methods of various fiber coils. We have obtained that the tension control and the accuracy of the winding during the fiber winding process affect the structure of the wound fiber coil. The key factor.

　　　By optimizing the aforementioned tension control factors and winding accuracy algorithm, the effective and stable control of reasonable tension, the effective and reliable high-precision winding control, the memory of all process parameters, and the convenience of control, a new generation of optical fiber winding machine was developed and put into production .

　　　With the practical application of research and development results, we will continue to improve and produce high-reliability and high-efficiency fiber optic gyro winding machines.

         REPOSAL Winding Machine? Released  Tandem flat-wound winding machine         

        Suzhou REPOSAL? Electronic Machinery Equipment Co., Ltd. released the sp-s112hb double-wound thick-wire air-core coil winding machine model-this model is mainly for the air-core coil with a large enameled wire diameter, and the winding speed is fast and consistent. Good performance, through the optimization of the control system and machinery, during the winding process of the larger enameled wire diameter air-core coil, it provides customers with a competitive solution for wire end fixation, tension control, winding accuracy, and demolding speed.

                   Detailed explanation of the operation instructions of the transformer winding machine

       Transformer winding machine is a special winding equipment for winding enameled coils of transformers. During the winding process of enameled coils of transformers, winding enameled wire equipment is divided according to the specifications of the transformer. Enameled wire winding machine and foil enameled coil winding machine; there are vertical winding machines and horizontal winding machines for winding enameled coils of large power transformers.

     1. Structural characteristics of transformer winding machine:

      1. The mechanical transmission part of the winding machine is located inside the headboard, and the electrical part is installed on the top of the headboard. The three-phase asynchronous motor is driven by the frequency converter to realize the linear change of the spindle speed.

      2. The winding machine adopts stepless speed regulation, and the controller outputs 0-10V analog voltage, which is connected to the inverter. By means of percentage, there are a total of 100 gears, which can be counted accurately, and can also be counted in reverse to automatically stop.

      3. The winding machine can count reversibly, and is equipped with an electromagnetic brake device to prevent reversing when winding the enameled wire to stop, and ensure that the automatic counting will not produce errors. If you need to manually reverse, you can manually press the brake button to release, and the manual rotation can also count.